INDOOR AIR QUALITY SOLUTION

Ronita technology group help you and your people to live in a safer and healthier facilities. Towards that end, real-time data about air quality is essential. And that starts with our one-stop solution for indoor air quality (IAQ).

So far, all the air quality system in the houses work based on timing and air circulation and air purifying happens without targeting any particular measurements which can be expensive. Also, by utilizing IAQ sensors we can monitor air quality parameters but we need a mechanism to control those parameters. By integrating the Sensors and Air quality systems, we can both measure the pollution of the air and purify the air accordingly and only when it's needed and significantly improve the indoor air quality of each home.

The Air quality system that we are offering to integrate with the new sensors are employing three different filtering system which are:

1-HRV:
A Heat Recovery Ventilator is a system that exchanges the stale indoor air with fresh, outside air. During the heating and cooling seasons, an HRV also captures the heat from the exhausted air and transfers it to the incoming air, preheating it before it enters the home.

2-HEPA FILTER:
It is an acronym for "High efficiency particulate air [filter]". This type of air filter can theoretically remove at least 99.97% of dust, pollen, mold, bacteria, and any airborne particles with a size of 0.3 microns (µm).

3-UV LIGHT:
UV lights purify the air by killing mold, bacteria and viruses, ultimately funneling clean air into the HVAC system for circulation. UV lights remove contaminants by emitting a light that destroys their DNA makeup. The contaminant is then not able to repair itself and is considered non-threatening.

It should be noted that the remaining air particles that were not removed by HEPA filter will be destroyed by UV light.

Having the Combination of sensors and these 3 systems in a house, not only result to have the highest quality air available for the household but it will Increasing the life of each system by more than 50% and reduce energy consumption and cost of operation.